A forum focusing on satellite TV
https://freedvb.com/
esdhrgl1 wrote: ↑Wed Jan 27, 2021 5:34 amBASED ON CONNECTOR POSITION IT SHOULD BE LIKE IN IMAGE ATTACHED AND DEPNDING ON YOUR CONNECTOR TYPE LOOK FOR CONNECTION IN IMAGE.
DO IT ON YOUR OWN RISK . DONT BLAME ME FOR ANYTHING WRONG HAPPENS AS THER IS NO LABELING.STILL YOU CAN CHECK GND WITH CONTINUITY CHECKER.
Do some thingsJoeU wrote: ↑Sat Jan 30, 2021 6:48 pmhay bro i buy everything but i get this type of error when i tryesdhrgl1 wrote: ↑Wed Jan 27, 2021 5:34 amBASED ON CONNECTOR POSITION IT SHOULD BE LIKE IN IMAGE ATTACHED AND DEPNDING ON YOUR CONNECTOR TYPE LOOK FOR CONNECTION IN IMAGE.
DO IT ON YOUR OWN RISK . DONT BLAME ME FOR ANYTHING WRONG HAPPENS AS THER IS NO LABELING.STILL YOU CAN CHECK GND WITH CONTINUITY CHECKER.
bootrom error wait for get please check stb uart receive
fail
please help me i am waiting for your reply thanks
esdhrgl1 wrote: ↑Sun Jan 31, 2021 6:58 amDo some thingsJoeU wrote: ↑Sat Jan 30, 2021 6:48 pmhay bro i buy everything but i get this type of error when i tryesdhrgl1 wrote: ↑Wed Jan 27, 2021 5:34 amBASED ON CONNECTOR POSITION IT SHOULD BE LIKE IN IMAGE ATTACHED AND DEPNDING ON YOUR CONNECTOR TYPE LOOK FOR CONNECTION IN IMAGE.
DO IT ON YOUR OWN RISK . DONT BLAME ME FOR ANYTHING WRONG HAPPENS AS THER IS NO LABELING.STILL YOU CAN CHECK GND WITH CONTINUITY CHECKER.
bootrom error wait for get please check stb uart receive
fail
please help me i am waiting for your reply thanks
1. Check for ground if it is ground with continuity checker
2 try with yaffs checked
3 If still unable to flash after yaffs checked try toggling tx and rx wire then flash without & with yaffs.
Most important share screenshot of device manager windows with serial com port for confirmation. In your case it seems like com6.
Last try with original dump of box
B ROTHER CHANGE THE RX WITH DX PIN IN 6605S BOARD MEAD LEFT CHAN GE WITH RIGHT PIN OKJoeU wrote: ↑Sun Jan 31, 2021 9:34 ami try with original dumb file and also try with yaff and without yaf but it always fail i also disabel window defender.... what is the problem?esdhrgl1 wrote: ↑Sun Jan 31, 2021 6:58 amDo some things
1. Check for ground if it is ground with continuity checker
2 try with yaffs checked
3 If still unable to flash after yaffs checked try toggling tx and rx wire then flash without & with yaffs.
Most important share screenshot of device manager windows with serial com port for confirmation. In your case it seems like com6.
Last try with original dump of box
what is the problem
Try downloading rs 232 downloader like ver 1.21 older then yours and run it as administrator.JoeU wrote: ↑Sun Jan 31, 2021 9:34 ami try with original dumb file and also try with yaff and without yaf but it always fail i also disabel window defender.... what is the problem?esdhrgl1 wrote: ↑Sun Jan 31, 2021 6:58 amDo some things
1. Check for ground if it is ground with continuity checker
2 try with yaffs checked
3 If still unable to flash after yaffs checked try toggling tx and rx wire then flash without & with yaffs.
Most important share screenshot of device manager windows with serial com port for confirmation. In your case it seems like com6.
Last try with original dump of box
what is the problem
bundle of thanks bro its working software updated ......... with help of yours ♥esdhrgl1 wrote: ↑Sun Jan 31, 2021 4:29 pmTry downloading rs 232 downloader like ver 1.21 older then yours and run it as administrator.JoeU wrote: ↑Sun Jan 31, 2021 9:34 ami try with original dumb file and also try with yaff and without yaf but it always fail i also disabel window defender.... what is the problem?esdhrgl1 wrote: ↑Sun Jan 31, 2021 6:58 am
Do some things
1. Check for ground if it is ground with continuity checker
2 try with yaffs checked
3 If still unable to flash after yaffs checked try toggling tx and rx wire then flash without & with yaffs.
Most important share screenshot of device manager windows with serial com port for confirmation. In your case it seems like com6.
Last try with original dump of box
what is the problem
Try finding ground pin using multimeter if u have!
And about problem you doing something wrong and only you can resolve it because we dont have board . Like you erassed your flash before uploading boot to ram or something like that.
And one thing please upload complete clear image of board high resolution with main ic that
meansn of gx6605s